Fender Pro Reverb Amp User Manual download pdf (Page 4)

www.fender.com

www.mrgearhead.net

A. INPUT - Input jack connection for your guitar.

•

•Channel

•

•1

B. VOLUME - Controls the overall loudness output of the

amp when channel–1 is active.

C. BRIGHT - This two-position button gives channel–1 a

treble boost:

button OUT > for BRIGHT OFF

button IN > for BRIGHT ON

D. T R E B L E - Controls the channel–1 h i g h - f requency level.

E. BASS - Controls the channel–1 low-frequency level.

F. MIDDLE - Controls the channel–1 mid-frequency level.

•

•Channel

•

•2

G. GAIN - Controls the pre-amplifier distortion level when

channel–2 is active. Higher GAIN levels produce more

distortion. Use GAIN in conjunction with channel–2

VOLUME (K) to set the overall volume output of the amp.

H. T R E B L E - Controls the channel–2 h i g h - f re q u e n c y

level. TREBLE has less effect as MIDDLE is turned

above “3.”

I. BASS - Controls the channel–2 low-frequency level.

J. MIDDLE - Controls the channel–2 mid-frequency level.

K. VOLUME - Controls the overall loudness output of the

amp when channel–2 is active in conjunction with

GAIN (G). Use this VOLUME control to set the output

level of channel–2 relative to the channel–1 settings.

L. CHANNEL SELECT - This two-position button

selects the active pre-amp channel:

button OUT > for Channel-1 > LED OFF

button IN > for Channel-2 > LED ON

Note: When the Footswitch is plugged in to the

FOOTSWITCH jack, CHANNEL SELECTION is possible

only from the Footswitch.

M. REVERB - Controls the Reverb level of both channels.

Note: Reverb can be toggled ON/OFF from the

Footswitch when it is plugged in.

N. SPEED - Controls Tremolo modulation rate. Note: The

Footswitch must be plugged in (with TREMOLO toggled

ON) to enable the Tremolo effect. Turn up INTENSITY to

make SPEED settings more audible.

O. INTENSITY - Controls the Tremolo sweep depth.

Note: The Footswitch must be plugged in (with

TREMOLO toggled ON) to enable the Tremolo effect.

Tremolo is less intense in the 1/4 power mode.

P. PRESENCE - Controls the ultra-high frequency level of

both channel–1 and channel–2.

Q. POWER INDICATOR - Illuminates when the POWER

is switched ON and the Pro-Tube amp is receiving

power. Note: Unscrew the red jeweled cover to access

the bulb for replacement. Use bulb type T47.

Congratulations! Your Fender

Pro-Tube Series amplifier

delivers world-class tone and professional quality

construction for many years of enjoyable service. Read

through this manual to take advantage of all the features

built into your Pro Reverb- or Concert Reverb–Amp:

◊

◊ Two pre-amp channels:

•

•Independent V O L U M E,

TREBLE, MIDDLE, a n d B A S S f o r each channel,

•

•Channel 1 BRIGHT switch for crisp tone emphasis,

•

•Channel 2 GAIN control for warm Pro-Tube distortion.

◊

◊ Tools for tone:

•

•Sweet sounding Fender spring REVERB,

•

•Ultra-high frequency definition from the PRESENCE

control,

•

•TREMOLO volume modulation with SPEED and

INTENSITY controls.

◊

◊ Effects loop options:

•

•Engage/bypass external effects

devices with the L O O P button,

•

•Normalize (or set

alternate) engage/bypass volume levels using the SEND

and RETURN controls.

◊

◊ Remote functions of the Four–button F o o t s w i t c h :

•

•CHANNEL select,

•

•EFFECTS LOOP bypass/ engage,

•

•REVERB on/off,

•

•TREMOLO on/off.

◊

◊ Expansion Options:

•

•Output to a second Pro-Tube amp

using the PRE-AMP OUT and POWER-AMP IN jacks, and

control both amps as one,

•

•Plug an 8 ohm external

speaker cabinet into your Pro Reverb–Amp or Concert

Reverb–Amp at the EXTERNAL SPEAKER jack,

•

•Output

to sound reinforcement or recording equipment using the

PRE-AMP OUT jack.

◊

◊ Selectable output levels:

•

•FULL POWER supplies 50

watts of output,

•

•1/4 OUTPUT P O W E R s u p p l i e s

12.5 watts of output for smaller venues,

•

•1/4 OUTPUT

POWER allows the drive tone created by high GAIN/

VOLUME settings to be generated at lower volume levels.

◊

◊ Quality built:

•

•The chassis is constructed from the finest,

most roadworthy components,

•

•The cabinets are made

from sturdy 3/4 inch birch/maple plywood,

•

•Cabinet

covering is genuine Tolex

for long lasting good looks.

◊

◊ Extras:

•

•Tilt-back legs provide an alternate listening

angle,

•

•Removable casters—ON for easy transportation

and OFF for secure cabinet placement.

◊

◊ This manual includes procedures for testing, balancing

and replacing the amplifier tubes at the core of your

Pro–Tube sound.

•

1 2 3 4 5 6 7 8 9 ... 27 28

Comments to this Manuals

No comments

Fender Pro Reverb Amp User Manual Page 4

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Fender Pro Reverb Amp